Sony Cybershot Software for Mac Free Download Updated

April 23, 2022 Post a Comment

Sony Cybershot Software for Mac Free Download

DSC-QX10/QX100 Firmware Upgrade Ver. 3.00 (Apple tree Macintosh)

Applicable Models

This information is for the following models:

DSC-QX100

Well-nigh this download

Thanks for your connected interest in Sony products.

Sony is offering a system software update for Digital Nonetheless Camera Cyber-shot ™ DSC-QX10/QX100.

Improvements after firmware upgrade

One-half-Printing of the shutter will be available
Improvement of NFC Ane-affect connection
Notation: Operating surround is PlayMemories Mobile app Version 4.2 or later on.

Improvements after update from version 1.00 to two.00

ISO Setting added
Movie Recording size changed: MP4 1440 10 1080(30p) to MP4 1920 x 1080(30p)
Shutter Speed Priority Shooting style added (DSC-QX100 only)

System Requirements

Supported Os

Mac OS X 5.x.6 – 10.11

If you are using Mac OS Ten Ver.x.10, you lot need to run Driver Loader, a preparatory application, earlier updating the system software.

If you are using Mac OS Ten Ver.10.9 or earlier, you practice not need to run Driver Loader.

Other organization requirements

CPU: Intel processor
Annotation: Core Solo and Core Duo processors are no longer supported.
Hard disk space: 200MB or more
RAM: 512MB or more

Annotation: Delight shut all other application software before updating the arrangement software.

Other Items

Ability source for the photographic camera
Fully charged rechargeable battery pack NP-BN.
Note: The upgrade tin can exist performed merely when the remaining battery level is (3 marks) or more. Nosotros recommend that you use a fully charged battery.
USB cable supplied with the photographic camera
Note: Update functionality is not guaranteed with any other USB cable.

Updating the system software (DSC-QX10/QX100)

When performing the system software update, please use a fully charged rechargeable battery pack NP-BN.
Do not remove the battery during the update; otherwise, the camera may become inoperable due to the sudden ability shutdown.
Remove the memory card from the camera beforehand.

Download the update file
Please relieve the downloaded file onto the Desktop of your computer (recommended).
Refer to the Help Guide(online transmission) when y'all would similar to know details.
Starting time up Firmware Updater
- Double-click the downloaded file. Do non connect the camera yet at this signal.
- Update_DSCQX10V300 or Update_DSCQX100V300 is expanded.
- Double-click the icon.

- To load a kernel extension, the bulletin prompts you to allow the application to brand changes. Type the password for the administrative account.

- Firmware Updater starts up.
Connect the photographic camera to the estimator
Remove the memory carte from the camera beforehand.
1. Connect the camera to the computer with the supplied USB cable.
2. Subsequently confirming the above, click Next on Firmware Updater.
  Below screen appears on Firmware Updater
  
  While this appears on the LCD monitor of the camera.
  
  Note: From now on, never turn off the camera until the system software update is completed.
Check if the updating is required
1. After confirming the screens, click Next. The current version and the version after the update appear on the lower left function of the screen.
2. Later on confirming Current version number is less than three.00, click Next.
  Annotation: If Current version is Ver.3.00, the upgrade is not required. According to the message, terminate the USB connectedness and click Finish. Plough off the camera, remove the battery pack, then turn on the photographic camera again.
Reset the photographic camera
1. The screen below appears.
2. Press the Shutter button. to execute.
  
  Note: The screen turns off when the ENTER button is pressed. Please go on to the adjacent step.
3. Click Next on Firmware Updater.
Start the update
1. Later on resetting, reconnection of the photographic camera is verified, and the screen below appears.
2. Click Run to get-go the update.The progress bar appears while updating (approximately 10 minutes).
Note: Never turn off the camera nor disconnect the USB cable while updating.
Consummate the update
When the update is completed, the post-obit screen appears.

Click Stop and disconnect the USB cablevision.
Note: Turn off the camera, remove the battery pack, re-insert the battery pack and and then turn on the camera once again.
Bank check the system software version
Follow the instruction below to confirm the arrangement software version is Ver.three.00.
1. Connect your smartphone and camera using the PlayMemories Mobile app.
2. Press the shutter push halfway to focus
  Notation: Operating environs is PlayMemories Mobile app Version 4.two or subsequently.
  
  If light-green marker is visible and so the organization software has been successfully upgraded to Ver.three.00.